These are the same high tensile steel bolts fitted in every Elite greenhouse we install. The 11mm length suits most glazing bar connections, shelf brackets, and accessory mounts. If you're replacing corroded bolts or fitting new accessories, these are the ones you need.
The cropped head is shaped to slide into the T-slot channel running along each Elite glazing bar. Once tightened, the head sits flush inside the channel. This gives a clean finish and stops the bolt head fouling against the glass or polycarbonate sheet.
Each pack contains 50 bolts with matching nuts. That's enough to reglaze several panes or fit multiple shelf brackets and staging supports. The high tensile steel resists shearing under load better than standard mild steel fixings. These won't round off or snap when you tighten them.
Compatible with all Elite greenhouse models including the Craftsman, Titan, Diamond, and Edge ranges. The 11mm bolt length works for standard glazing bar junctions. For thicker connections or base fixings, use the 22mm cropped head bolts instead.
Delivery Times:
All Models in Plain Aluminium Finish: 4–5 Weeks
Powder Coated Compact, Streamline, Craftsman, High Eave and Belmont: 8–10 Weeks.
All other Powder Coated Models: 10–14 Weeks.
Your new Elite Greenhouse will be delivered directly from the Elite factory using specialised delivery lorries. Delivery is curbside.
We will contact you by telephone at least 7 days prior to delivery. If you have any questions or concerns, please reach out to us.
Optional Installation: If selected, Installation will be carried out 1-8 weeks after the delivery of your Greenhouse. The Installation Team will contact you directly to book in your installation.Our installation service requires a level Concrete, Slabbed or Decked Area to the minimum size stated on the website and with 18-24 Inches of clearance around it. Failure to provide a suitable base area and clearance may result in you being charged for the failed installation If you require staging or shelving assembly, you can arrange it directly with the installation team.