Automatic Watering System Complete Kit for 10x12 Greenhouse

Complete layout: This kit is designed for a 10x12 greenhouse and uses 15L pots in pairs. It has twenty-four easy2grow trays with forty-eight pots in total. The larger pots give tomatoes, cucumbers, melons and other climbing crops more room. Water reaches the trays by gravity from a separate reservoir. The system needs no pump, mains water connection or electricity.

Heavier-feeding climbing crops suit this AutoPot automatic greenhouse irrigation system for a 10x12 greenhouse. The greenhouse watering kit has thirty 15L pots in fifteen paired easy2grow trays.

The AQUAvalve5 handles the watering automatically. It lets a shallow 20mm layer of water into each tray, then shuts off. Once the plants have used that water, the valve opens and tops the tray up again. Water flows in by gravity from an external water butt or reservoir, so no pump is needed.

What is included

• 48x 15L Pot
• 24x 2Pot Tray and Lid
• 24x AQUAvalve5
• 48x Square Root Control Sock
• 48x Marix Disc
• 1x 16mm Click Fit Filter
• 5 metres of 9mm Pipe
• 14 metres of 16mm Pipe
• 24x 16mm-9mm Tee Connector
• 2x 16mm Tee Connector
• 5x 16mm Elbow Connector
• 3x 16mm In-Line Tap

What you still need

You need one separate water butt or reservoir of at least 200L. This is not included with the kit.

If you keep a reservoir inside the greenhouse, leave enough room for it. You may need to remove one or two modules.

How to set it up

1. Choose a firm, level surface and check that every tray sits flat.
2. Place the external water butt or reservoir 150mm / 6 inches above the system.
3. Water the plants by hand when you first pot them up. Wait 7-28 days for roots to establish before turning on the system.
4. Flush the pipework every week.