Bonanza 0.35m2 Cabinet Height Extension Set
At a glance
- Adds 56cm of height (total 232cm)
- For the Bonanza 0.35m2 cabinet
- New back panel with air inlet holes cut
- Air outlet and cable holes in the extension panel
- Lock included
- Room for taller plants or higher-mounted lights
Quick Code: P175519
Run out of headroom in a Bonanza 0.35? This extension panel set lifts the cabinet by 56cm, so the finished height comes to 232cm. That gap matters when a plant stretches up or when a light needs hanging further off the canopy to spread its coverage.
You get a replacement back panel with the air inlet holes already cut. The outlet and cable holes sit in the extension section, so once it is bolted on the airflow path stays exactly as the cabinet was designed. A lock is supplied to match the original doors.
- Adds 56cm of height (total 232cm)
- For the Bonanza 0.35m2 cabinet
- New back panel with air inlet holes cut
- Air outlet and cable holes in the extension panel
- Lock included
- Room for taller plants or higher-mounted lights
