The WaterMate Pro handles the watering across a large greenhouse, a polytunnel or a whole allotment. Each zone covers up to 20 square metres.
It starts as a two-zone system and takes extra zone kits up to six zones in total. Beds, pots and hanging baskets can each run on their own schedule.
The Pro pump delivers 35psi. That is enough for soaker and porous hose. It will drip-feed up to 120 plants, or more using sprayers.
Set watering times and durations to suit each zone. The temperature sensor adds extra water automatically when the greenhouse gets too hot, which is when plants suffer most.
The included 10W solar panel keeps it charged, so no mains supply is needed. Connect it to WiFi to control it from anywhere. Email alerts cover high or low temperature, watering, and an empty tank.
What you receive
- WaterMate Pro control unit with built-in rechargeable battery
- 10W solar panel with mounting bracket
- 35psi Pro pump with inlet filter
- Two watering zones with valves and mounting kit
- Temperature sensor
- LDPE supply pipe and 4mm micro tubing
- Drippers and sprayers with connectors and end stops
- Fixings and full setting-up instructions
Key features
- Covers up to 20 square metres per zone
- Expands from two zones to six with extra zone kits
- 35psi pump - works with soaker and porous hose
- Waters up to 120 plants by dripper
- Temperature sensor triggers extra watering in heat
- 10W solar panel included - no mains supply needed
- WiFi control plus email alerts for heat and empty tank
- Designed and built in Britain by Harvst
The WaterMate Pro handles the watering across a large greenhouse, a polytunnel or a whole allotment. Each zone covers up to 20 square metres.
It starts as a two-zone system and takes extra zone kits up to six zones in total. Beds, pots and hanging baskets can each run on their own schedule.
The Pro pump delivers 35psi. That is enough for soaker and porous hose. It will drip-feed up to 120 plants, or more using sprayers.
Set watering times and durations to suit each zone. The temperature sensor adds extra water automatically when the greenhouse gets too hot, which is when plants suffer most.
The included 10W solar panel keeps it charged, so no mains supply is needed. Connect it to WiFi to control it from anywhere. Email alerts cover high or low temperature, watering, and an empty tank.
What you receive
- WaterMate Pro control unit with built-in rechargeable battery
- 10W solar panel with mounting bracket
- 35psi Pro pump with inlet filter
- Two watering zones with valves and mounting kit
- Temperature sensor
- LDPE supply pipe and 4mm micro tubing
- Drippers and sprayers with connectors and end stops
- Fixings and full setting-up instructions
Key features
- Covers up to 20 square metres per zone
- Expands from two zones to six with extra zone kits
- 35psi pump - works with soaker and porous hose
- Waters up to 120 plants by dripper
- Temperature sensor triggers extra watering in heat
- 10W solar panel included - no mains supply needed
- WiFi control plus email alerts for heat and empty tank
- Designed and built in Britain by Harvst
Suits greenhouses, polytunnels, garden beds, allotments and hanging baskets. Add extra zone kits at any time.