800mm (2′ 7″)
400mm (1′ 3″)
850mm (2′ 9″)
Palram Canopia 2 Tier Staging is a heavy-duty polypropylene shelf unit rated to 200kg. 800mm wide, 400mm deep, 850mm tall. Designed for Palram greenhouses but fits any greenhouse with the floor space.
The perforated shelf surfaces let water drain through and air circulate around your plants. This matters in a greenhouse where standing water breeds mould and fungal problems. Lift your seedlings off the ground and they grow stronger.
At 200kg capacity, this staging handles loaded seed trays, heavy terracotta pots, and bags of compost without flexing. The polypropylene frame will never rust, bend, or corrode in damp greenhouse conditions. It outlasts aluminium staging.
Push-fit assembly with no tools required. The legs click into the shelf frames and lock solid. Takes under 10 minutes. At 800mm wide and 400mm deep, one unit fits along the side wall of a 6ft wide Palram greenhouse with room to walk past.
1-Man Deliveries: Your new Palram Shed or Greenhouse will be delivered within 3-5 working days.
2-Man Deliveries: Larger items will be delivered within 7-10 working days.
You will receive a text message from Arrow XL to schedule your delivery. Please respond as soon as possible to ensure prompt delivery.
800mm (2′ 7″)
400mm (1′ 3″)
850mm (2′ 9″)
Clear Polycarbonate: This polycarbonate is completely clear like glass. It is very thin at 0.2mm, but extremely tough and shatterproof.
Twin Wall Polycarbonate: This polycarbonate is virtually unbreakable and high impact resistant. They are slightly opaque, preventing strong sunlight exposure, yet offer 80% light transmission with high thermal insulation. The panels are 100% UV protected and will not discolour, fracture or shatter.
Yes it’s shatterproof and high impact resistant. However, as polycarbonate is very light, we do not recommend placing these greenhouses in exposed areas with high wind.
No, there is no floor or base. These greenhouses are ideally to be placed on a concrete, slab or decking base.
We recommend securing the greenhouse to a hard, level surface (concrete, slabs, or decking) immediately after construction. This is essential for the stability and rigidity of your new greenhouse. You can use a screw and a washer through the compatible pre-drilled holes in the greenhouse frame into a raw plug in your concrete/slab surface.
Yes, you will be notified by text where you can then pick which delivery day suits you. Easy!