Quick Code: P175986
Starter layout: This mixed kit is designed for a 10x12 greenhouse. It has individual pots for bushy plants and paired pots for climbers. It has fifteen 1Pot trays with fifteen 15L pots, plus two Tray2Grow modules. Five easy2grow trays hold ten 8.5L pots. Water comes from separate reservoirs by gravity, so no pump or electricity is needed.
The individual 1Pot trays suit peppers, chillies and aubergines. Use the paired easy2grow pots for tomatoes, cucumbers and melons.
Tray2Grow can be used with pots, seed trays, grow bags or a compatible fabric planter.
The AQUAvalve5 handles the watering automatically. It lets a shallow 20mm layer of water into each tray, then shuts off. Once the plants have used that water, the valve opens and tops the tray up again. Water flows in by gravity from an external water butt or reservoir, so no pump is needed.
The kit includes a 30L reservoir with its lid and grommet. You also need two separate 200L water butts or reservoirs, with 400L capacity in total. The separate water butts or reservoirs are not included.
If you use Tray2Grow with seed trays, grow bags or a fabric planter, add these separately.
If you keep a reservoir inside the greenhouse, leave enough room for it. You may need to remove one or two modules.
Starter layout: This mixed kit is designed for a 10x12 greenhouse. It has individual pots for bushy plants and paired pots for climbers. It has fifteen 1Pot trays with fifteen 15L pots, plus two Tray2Grow modules. Five easy2grow trays hold ten 8.5L pots. Water comes from separate reservoirs by gravity, so no pump or electricity is needed.
The individual 1Pot trays suit peppers, chillies and aubergines. Use the paired easy2grow pots for tomatoes, cucumbers and melons.
Tray2Grow can be used with pots, seed trays, grow bags or a compatible fabric planter.
The AQUAvalve5 handles the watering automatically. It lets a shallow 20mm layer of water into each tray, then shuts off. Once the plants have used that water, the valve opens and tops the tray up again. Water flows in by gravity from an external water butt or reservoir, so no pump is needed.
The kit includes a 30L reservoir with its lid and grommet. You also need two separate 200L water butts or reservoirs, with 400L capacity in total. The separate water butts or reservoirs are not included.
If you use Tray2Grow with seed trays, grow bags or a fabric planter, add these separately.
If you keep a reservoir inside the greenhouse, leave enough room for it. You may need to remove one or two modules.
