Automatic Watering System Complete Kit for 8x10 Greenhouse

Complete layout: For an 8x10 greenhouse, this kit has twenty-two easy2grow trays with forty-four 8.5L pots. Each tray holds two pots. This paired layout suits tomatoes, cucumbers, melons and other climbing crops. Gravity carries water from a separate reservoir to the trays. No pump, mains water connection or electricity is needed.

Ten paired easy2grow trays hold twenty 8.5L pots in this greenhouse watering kit. We recommend this AutoPot automatic greenhouse irrigation system for climbing crops in an 8x10 greenhouse.

The AQUAvalve5 handles the watering automatically. It lets a shallow 20mm layer of water into each tray, then shuts off. Once the plants have used that water, the valve opens and tops the tray up again. Water flows in by gravity from an external water butt or reservoir, so no pump is needed.

What is included

• 44x 8.5L Pot
• 22x 2Pot Tray and Lid
• 22x AQUAvalve5
• 44x Square Root Control Sock
• 44x Marix Disc
• 1x 16mm Click Fit Filter
• 4 metres of 9mm Pipe
• 12 metres of 16mm Pipe
• 22x 16mm-9mm Tee Connector
• 2x 16mm Tee Connector
• 5x 16mm Elbow Connector
• 3x 16mm In-Line Tap

What you still need

You need one separate water butt or reservoir of at least 200L. This is not included with the kit.

If you keep a reservoir inside the greenhouse, leave enough room for it. You may need to remove one or two modules.

How to set it up

1. Choose a firm, level surface and check that every tray sits flat.
2. Place the external water butt or reservoir 150mm / 6 inches above the system.
3. Water the plants by hand when you first pot them up. Wait 7-28 days for roots to establish before turning on the system.
4. Flush the pipework every week.