Quick Code: P175977
Plus layout: Designed for an 8x10 greenhouse, this kit has two Tray2Grow modules and nine individual 1Pot trays. Each 1Pot tray has a 15L pot. Seven easy2grow trays hold fourteen 8.5L pots for climbing crops. The individual pots suit bushier plants. Separate reservoirs feed the system by gravity, with no pump or electricity needed.
A varied crop plan suits this AutoPot automatic greenhouse irrigation system for an 8x10 greenhouse. The greenhouse watering kit combines Tray2Grow, 1Pot and easy2grow modules.
Use the 1Pot trays for peppers, chillies and aubergines. Tomatoes, cucumbers and melons suit the paired pots in the easy2grow trays.
Tray2Grow can be used with pots, seed trays, grow bags or a compatible fabric planter.
The AQUAvalve5 handles the watering automatically. It lets a shallow 20mm layer of water into each tray, then shuts off. Once the plants have used that water, the valve opens and tops the tray up again. Water flows in by gravity from an external water butt or reservoir, so no pump is needed.
The kit includes a 30L reservoir with its lid and grommet. You also need two separate 200L water butts or reservoirs, with 400L capacity in total. The separate water butts or reservoirs are not included.
If you use Tray2Grow with seed trays, grow bags or a fabric planter, add these separately.
If you keep a reservoir inside the greenhouse, leave enough room for it. You may need to remove one or two modules.
Plus layout: Designed for an 8x10 greenhouse, this kit has two Tray2Grow modules and nine individual 1Pot trays. Each 1Pot tray has a 15L pot. Seven easy2grow trays hold fourteen 8.5L pots for climbing crops. The individual pots suit bushier plants. Separate reservoirs feed the system by gravity, with no pump or electricity needed.
A varied crop plan suits this AutoPot automatic greenhouse irrigation system for an 8x10 greenhouse. The greenhouse watering kit combines Tray2Grow, 1Pot and easy2grow modules.
Use the 1Pot trays for peppers, chillies and aubergines. Tomatoes, cucumbers and melons suit the paired pots in the easy2grow trays.
Tray2Grow can be used with pots, seed trays, grow bags or a compatible fabric planter.
The AQUAvalve5 handles the watering automatically. It lets a shallow 20mm layer of water into each tray, then shuts off. Once the plants have used that water, the valve opens and tops the tray up again. Water flows in by gravity from an external water butt or reservoir, so no pump is needed.
The kit includes a 30L reservoir with its lid and grommet. You also need two separate 200L water butts or reservoirs, with 400L capacity in total. The separate water butts or reservoirs are not included.
If you use Tray2Grow with seed trays, grow bags or a fabric planter, add these separately.
If you keep a reservoir inside the greenhouse, leave enough room for it. You may need to remove one or two modules.
