Vitavia Apollo quick start
Vitavia Apollo 2500, 3800, 5000
Build your Apollo in two base steps and seven assembly steps, with two people and a square, level foundation. Use screwdrivers, 10 mm spanners, a tape measure and a spirit level. Your Apollo includes a zinc-coated steel base and anchor legs.
- 2500 1310 + 70 × 1942 mm
- 3800 1932 + 70 × 1942 mm
- 5000 2554 + 70 × 1942 mm
The steps
0APrepare the foundation
Prepare a square, level foundation and holes for the anchor legs.
0BBuild the steel base
Assemble the steel base and place it on the prepared foundation.
1Build both side frames
Build two identical side frames flat on the ground, with the bolts loose.
2Build the back gable
Build the back gable flat on the ground, with the bolts loose.
3Build the door gable
Build the door gable flat on the ground, with the bolts loose.
4Join the frame
Bolt the frames together, clip them to the steel base, then square up and tighten.
5Build and hang the door
Build the sliding door and hang it in its tracks.
6Build and fit the vent
Build the roof vent and fit it into the roof.
7Fit the glazing
Fit the glazing, then set the anchor legs in concrete once the greenhouse is fully built.
Use our full assembly guide for every size on this website, or choose professional installation from Greenhouse Stores.