Quick Code: P175974
Plus layout: This kit combines individual pots and paired pots for an 8x6 greenhouse. It has one Tray2Grow module and four 1Pot trays, each with a 15L pot. Four easy2grow trays hold eight 8.5L pots between them. The mix suits bushy plants and climbing crops. A separate reservoir supplies water by gravity, so no pump or electricity is needed.
We recommend this AutoPot automatic greenhouse irrigation system for propagation, salads and climbing crops in an 8x6 greenhouse. The greenhouse watering kit combines Tray2Grow and easy2grow modules.
Use the 1Pot trays for peppers, chillies and aubergines. The easy2grow trays suit tomatoes, cucumbers and melons.
Tray2Grow can be used with pots, seed trays, grow bags or a compatible fabric planter.
The AQUAvalve5 handles the watering automatically. It lets a shallow 20mm layer of water into each tray, then shuts off. Once the plants have used that water, the valve opens and tops the tray up again. Water flows in by gravity from an external water butt or reservoir, so no pump is needed.
The kit includes a 30L reservoir with its lid and grommet. You also need one separate water butt or reservoir of at least 200L. The separate water butt or reservoir is not included.
If you use Tray2Grow with seed trays, grow bags or a fabric planter, add these separately.
If you keep a reservoir inside the greenhouse, leave enough room for it. You may need to remove one or two modules.
Plus layout: This kit combines individual pots and paired pots for an 8x6 greenhouse. It has one Tray2Grow module and four 1Pot trays, each with a 15L pot. Four easy2grow trays hold eight 8.5L pots between them. The mix suits bushy plants and climbing crops. A separate reservoir supplies water by gravity, so no pump or electricity is needed.
We recommend this AutoPot automatic greenhouse irrigation system for propagation, salads and climbing crops in an 8x6 greenhouse. The greenhouse watering kit combines Tray2Grow and easy2grow modules.
Use the 1Pot trays for peppers, chillies and aubergines. The easy2grow trays suit tomatoes, cucumbers and melons.
Tray2Grow can be used with pots, seed trays, grow bags or a compatible fabric planter.
The AQUAvalve5 handles the watering automatically. It lets a shallow 20mm layer of water into each tray, then shuts off. Once the plants have used that water, the valve opens and tops the tray up again. Water flows in by gravity from an external water butt or reservoir, so no pump is needed.
The kit includes a 30L reservoir with its lid and grommet. You also need one separate water butt or reservoir of at least 200L. The separate water butt or reservoir is not included.
If you use Tray2Grow with seed trays, grow bags or a fabric planter, add these separately.
If you keep a reservoir inside the greenhouse, leave enough room for it. You may need to remove one or two modules.
