Vitavia Ida quick start
Vitavia Ida 3300
The Vitavia Ida 3300 lean-to stands on its own base, with its back screwed to a house wall. It has two sliding doors, one roof vent and polycarbonate panes. You need two people, screwdrivers, a 10 mm spanner, a drill and a square, level base.
- 3300 2544 × 1279 mm
The steps
0Prepare the base
Prepare a square, level base before the seven assembly steps.
1Build the front wall
Build the front wall flat on the ground with the bolts loose.
2Build the ends and roof
Connect the ends and roof, with the bolts still loose.
3Fix to the house wall
Square the frame on its base, tighten it and screw it to the wall using supplied screws and plugs.
4LFit the left-hand door
Build and hang the left-hand sliding door.
4RFit the right-hand door
Build and hang the right-hand sliding door, then adjust both doors until they slide freely.
5Fit the roof vent
Build the roof vent and fit it to the roof.
6Fit the polycarbonate panes
Fit the polycarbonate panes with their UV-resistant sides outside.
Read our full step-by-step assembly guide on this website, or choose professional installation from Greenhouse Stores.