Vitavia Ida quick start
Vitavia Ida 3300
The Ida 3300 lean-to stands on its own base, with its back screwed to a house wall. It has two sliding doors and one roof vent. You need two people, screwdrivers, 10 mm spanners, a tape measure, a spirit level and a square, level base.
- 3300 1279 × 2544 mm
The steps
0Prepare the base
Prepare a square, level base before the seven assembly steps.
1Build the front wall
Build the front wall flat on the ground, with bolts loose.
2Build ends and roof
Connect the ends and roof, with bolts still loose.
3Fix to the house wall
Square the frame on its base, tighten it and fix it to the wall; wall fixings are not included.
4LBuild the left-hand door
Build and hang the left-hand sliding door.
4RBuild the right-hand door
Build and hang the right-hand sliding door, then adjust both doors.
5Fit the roof vent
Build and fit the roof vent.
6Fit the glass
Fit the glazing seal, then fit the glass from the bottom upwards.
Follow our full step-by-step assembly guide on this website, or choose professional installation from Greenhouse Stores.