Vitavia Ida quick start
Vitavia Ida 5200, 6500, 7800
The Ida 5200, 6500 and 7800 stand on their own base, with the back screwed to a house wall. You need two people, screwdrivers, 10 mm spanners, tape measure, spirit level and a square, level base. Wall plugs, screws and drill are not included.
- 5200 1901 × 2544 mm
- 6500 1901 × 3166 mm
- 7800 1901 × 3788 mm
The steps
0Prepare the base
Prepare a square, level base before starting the eight assembly stages.
1Build the front wall
Choose your door layout and build the front wall flat on the ground with loose bolts.
2Build and connect the sides
Build the sides and bolt them loosely to the front wall.
3Fit roof bars and gutter
Fit the roof bars and gutter, with the bolts still loose.
4Fix to the house wall
Square the frame on its base, tighten the bolts and fix it to the house wall.
5ABuild two single doors
Build two single sliding doors if you choose a single-door layout.
5BLBuild the left-hand double door
For a front double sliding door, build and hang the left-hand door.
5BRBuild the right-hand double door
Build and hang the right-hand double door, then adjust both doors.
6Build and fit roof vents
Fit one roof vent on the 5200, or two on the 6500 and 7800.
7AFit glass walls and roof
Follow step 7A for glass walls with a polycarbonate roof.
7BFit all polycarbonate glazing
Follow step 7B instead for an entirely polycarbonate greenhouse.
8Fit the down pipes
Fit the down pipes on both sides.
Use our full assembly guide for every size on this website, or choose professional installation from Greenhouse Stores.