Vitavia Ida quick start
Vitavia Ida 900, 1300
The Ida lean-to stands on its own base, with its back screwed to a house wall. Build with two people, basic hand tools and a drill, on a square, level base. The build has a base step and six assembly steps, with one sliding door and one roof vent.
- 900 653 × 1300 mm
- 1300 653 × 1922 mm
The steps
0Prepare the base
Prepare a square, level base; gather screwdrivers, 10 mm spanners, tape measure, spirit level and drill.
1Build the front wall
Build the front wall flat on the ground, with the bolts loose.
2Build ends and roof
Connect the ends and roof, and keep the bolts loose.
3Fix to the house wall
Square the frame on its base, tighten it, then fix it to the wall with supplied screws and plugs.
4Build and hang the door
Build the sliding door and fit it into its tracks.
5Build and fit the vent
Build the roof vent and fit it into the ridge bar.
6Fit the panes
Fit the glazing seal, then the panes.
Our full step-by-step guide for every size is on this website; Greenhouse Stores also provides professional installation.