Vitavia Jupiter quick start
Vitavia Jupiter 6700, 8300, 9900, 11500
Build your Jupiter with two people, basic hand tools and a square, level base. Assemble the frames flat and loosely, then square and tighten them on the base. You will fit double sliding doors and two or four roof vents, depending on size.
- 6700 2544 × 2544 mm
- 8300 3166 × 2544 mm
- 9900 3788 × 2544 mm
- 11500 4410 × 2544 mm
The steps
0Prepare your base
Prepare a square, level base; have screwdrivers, 10 mm spanners, a tape measure and spirit level ready.
1Build both side frames
Build both side frames flat on the ground and leave the bolts loose.
2Build the back gable
Assemble the plain back gable flat on the ground.
3Build the door gable
Assemble the front gable with its door posts and runners.
4Join and stand the frame
Join and stand the frame together, square it on the base, then tighten the bolts.
5RFit the right-hand door
Build and hang the right-hand sliding door.
5LFit the left-hand door
Build and hang the left-hand sliding door, then adjust both doors.
6Fit the roof vents
Build and fit two roof vents for the 6700, or four for the other sizes.
7Fit the glazing
Fit the glazing seal, then glaze the greenhouse.
Read our full step-by-step assembly guide for every size, or choose Greenhouse Stores' professional installation if you'd rather not build.