Vitavia Phoenix quick start
Vitavia Phoenix 6700, 8300, 9900, 11500
The Phoenix 6700, 8300, 9900 and 11500 include a zinc-coated steel base for a square, level foundation. You build frames flat and loosely, then join, square and tighten them on the base with two people. It has double sliding doors, a base-mounted bottom track and two or four roof vents.
- 6700 2554+70 × 2564 mm
- 8300 3176+70 × 2564 mm
- 9900 3798+70 × 2564 mm
- 11500 4420+70 × 2564 mm
The steps
0Foundation and steel base
Prepare a square, level foundation, then assemble and position the supplied steel base.
1Build both side frames
Build both side frames flat on the ground and leave the bolts loose.
2Build the back gable
Build the back gable flat on the ground and leave the bolts loose.
3Build the door gable
Build the door gable flat on the ground and leave the bolts loose.
4Join and square the frame
Join the frames, lift them onto the steel base, then square the greenhouse and tighten the bolts.
5LFit the left-hand door
Build and hang the left-hand sliding door.
5RFit the right-hand door
Build and hang the right-hand sliding door, then adjust both doors.
6Build and fit roof vents
Build and fit two roof vents for the 6700, or four for the other sizes.
7APolycarbonate roof with glass sides
Follow glazing layout 7A only for a polycarbonate roof with glass sides and doors.
7BLarge 3 mm glass panes
Follow glazing layout 7B only for large glass panes throughout.
7CSmall overlapping horticultural glass panes
Follow glazing layout 7C only for small overlapping glass panes.
7DPolycarbonate all round
Follow glazing layout 7D only for polycarbonate throughout.
Use our full assembly guide on this website for every size, or choose professional installation from Greenhouse Stores.